Summary
Between 21 and 29 September 2026, Printix users experienced intermittent print release failures. The service sometimes held an incorrect online status for a workstation, so a release could fail even though the workstation was available.
The issue was active on three days - 21 September: approximately 06:15 to 22:00; 24 September: approximately 08:40 to 17:10, and 29 September: approximately 08:10 to 10:25. Timestamps are in UTC. Not all workstations were affected during these periods.
Root cause
The issue was caused by a software defect in the Printix client. Under certain conditions, affected clients repeatedly re-established their connection to the service, creating duplicate workstation entries and a high volume of events. This caused Printix to hold an incorrect online status for some workstations and delayed the processing of workstation status updates. The same defect was behind each occurrence.
Resolution
Each occurrence was resolved by isolating the source of the excess activity, which allowed the backlog to clear. On 29 September we increased processing capacity, and no further incidents have been observed since. We have also strengthened monitoring so similar delays are detected earlier. A fix to the Printix client and an additional safeguard limiting repeated connection attempts are in development.